![[ All Local And Professional Services ]](https://forallservices.home.blog/wp-content/uploads/2019/07/cropped-cropped-favicon-3.png)
When it comes to any house renovation, the ones involving installation are often the hardest. People especially freak out when they need to get a new sink in their kitchen. But worry not, there are some tips you can follow to make the entire process easier.
Picking the Right Sink
Before the actual process of installation, make sure that you are picking out the right sink for the job. It should be in the perfect length, height and size. It needs to the counter-top in a perfect fashion as well so that you are not bothered in the future. Make the measurements of the cabinet and the entire area before you end up making the purchase. This is important if you are not altering your cabinets and countertops. If you are changing them, then you can choose the sink of any size that you deem fit. Consult a Sink Installation Company in Ontario CA for advice if you are confused about any of it.
Commencing the Installation Process
You need to site the opening to initiate the installation process. The manufacturing company that made the sink usually has a template for it. The template needs to be placed at the center of the sink cabinet about 1 ½ inches behind the countertop’s front edge. The distance needs to be increased if the countertop is deeper. For instance, if the countertop’s depth is more than 24 inches, put it farther back. But do not go more than four inches. Use a tape to hold the template in place. You should then outline the template with a marker.
Making the Hole
Make sure you properly mark the opening. After doing that part, you should remove the template and then drill an 3/8-inch diameter hole in all of the corners. Take a saber-saw blade and put it in the holes and cut alongside the lines’ interior. You should also add a scrap of wood to the opening which is sufficient for it. If you feel like you cannot perform this task, it is recommended that you look for a high-quality Sink Installation Service in Ontario CA.
Putting up the Faucet
Before adding in the sink, it is important to install in the faucet. Look at a video tutorial online and you can easily add the kitchen faucet. Be sure to add the sink strainers as well. You then need to add a seal which will be amidst the counter-top and sink. Use a bead of silicone caulk for this purpose.
Putting the Sink in Place
You need to be highly careful with this task. Take the sink and with great attention, flip it over. You should make sure you do not ruin the caulk while you are performing this task. After doing this, install it at the designated place. If it’s too heavy for you to lift alone, get some help with it.
Fastening It in Place
Use special mounting clips that will ensure the sink is fastened securely. Learn the proper instructions on how to use the mounting clips. You should follow the instructions that the manufacturer of the sink has given you.
[ All Local And Professional Services ] 